塑料破碎机检查与处理
Inspection and treatment of plastic crusher
1、电动机、减速器、液压联轴节、机头、机尾等各部分的联接件必须齐全、完好、紧固。减速器、 液压器轴节应无渗油、漏油，油量要适当。
1, the connecting parts of motor, reducer, hydraulic coupling, nose and tail must be complete, intact and fastened. The reducer and hydraulic shaft should not leak oil and oil leakage.
2、信号必须灵敏可靠，没有信号不准开机。喷雾洒水装置要保证完好。
2, the signal must be sensitive and reliable, no signal is not allowed to turn on. The spray sprinkler should be guaranteed to be in good condition.
3、电源电缆、操作线必须挂整齐，无受挤压现象；
3, power cables and operation lines must be neatly placed without any extrusion.
4、机头附近的煤、矸石、杂物及电动机、减速器煤尘必须清扫清净；
4, coal, gangue, sundries, motor and decelerator coal dust near the nose must be cleaned.
5、工作面刮输送机机头与转载机机尾的搭接要合适；
5. The overlap between the conveyor head and the tail of the loader should be suitable.
6、刮板链板紧要适中，刮板及螺丝必须齐全紧固；
6. The scraper chain plate is moderately tight, and the scraper and screws must be completely fastened.
7、转载机行走小车必须平稳可靠；
7. The trolley of the reloader must be stable and reliable.
8、转载机桥身部分情况下开机时，各部伯的运转应无异常声音，刮板、 链条、连接环应无扭挠、扭麻花、弯曲变形；
8. When the bridge body part is opened, the operation of each department should have no abnormal sound. The scraper, chain and connection ring should not be twisted, twisted and twisted.
9、破碎机、破碎机处的巷道支护必须完好，牢固。
9. The roadway support at the crusher and crusher must be intact and solid.
10、破碎机的安全保护网及保护装置，要保证不变形不失效、安全可靠；
10, the safety protection net and protection device of the crusher should be ensured that no deformation, failure, safety and reliability.
11、转载机、破碎机处的巷道支护必须完好，牢固。
11, the roadway support of the loader and crusher must be intact and solid.